DiamondTome® Wands 

Original Crystal Free Device

The patented DiamondTome® wand is the original crystal free device used in all of the Altair Instruments Microdermabrasion systems. These wands have natural diamonds bonded on the tip of the wand and are specifically designed to glide over every unique curve on the face and body, producing smoother and radiant skin.

DiamondTome wands are based on crystal-free technology which decreases the risk of particle clogging and other potential skin problems.  It helps polish the skin by removing the top layer of dead skin cells which causes buildup and of course, clogging the pores.  

How DiamondTome® Wands Help the Skin

Skin conditions are becoming more common among individuals in constant contact with the sun and those exposed to pollution and free radicals on a daily basis.  All of this can leave the skin dry, rough, damaged, and looking dull.   

It’s also great for extracting blackheads. The procedures are non-invasive, painless, and suitable for most skin types. Its design creates a more hygienic and safer process for users. 

DiamondTome® Wand Configurations Offered:

The wands come in various diamond grits and sizes to address even the most delicate skin types:

Fine - Measured at 75 microns

Medium - Measured at 100 microns

Coarse - Measured at 125 microns

Extra Coarse - Measured at 175 microns

The coarse and extra coarse wands are recommended when the skin is thick and oily and a more aggressive approach to skin exfoliation is required, or if there are acne scars.

Configuration of the Tips

The diamond chips are bonded on the tip of the wand. They are available in two configuration types: flat

and beveled. These two configurations enable the wand to be used on the face, hands, neck, and on other

delicate parts of the body.

Contoured Platinum Body Wands

 

 

 

 

 

 

 

In addition to the flexibility of the wands’ tips, Altair Instruments also offers three types of contoured body wands: DX20, DX30 and DX40.

 

DX20 is designed to be able to glide over the larger area on the face, neck and decollete. 

 

The DX30 and DX40 are ideal for treating larger parts of the body, such as the back, legs, and arms.

For further questions, please ask us about the differences and we would be happy to help you understand what works best for your clients.

Cleaning and Sterilizing

Cleaning should be done after each use.

 

Consider the following steps:

  1. Soak in enzymatic detergent for 10 minutes.

  2. Rinse with hot, running water.

  3. Scrub abrasive surface with a brass brush for protein removal and insert the round brush for inside the wand.

  4. Place in a hospital grade disinfectant solution for a maximum of 10 minutes.

  5. Rinse wands under water and pat dry before using.

Consider steam sterilization if the surface of the skin has been penetrated.